Changing The Relay Broadcast Settings - Canon 700 Series Facsimile Manual

9
Stop
Press [Stop] to return to the Standby mode.

Changing the Relay Broadcast Settings

Follow this procedure to change the relay broadcast settings.
NOTE
• If you want to add to the list of fax machines that receive relay broadcasts from your
machine, make sure that the numbers you want to add are registered for one-touch or
coded speed dialing.
• If you want to set your machine to confirm the identity of the originator before it receives
a document for relay broadcasting, make sure the telephone number of the originator's
fax machine is registered for one-touch or coded speed dialing on your machine.
1
Open all three one-touch speed dialing panels ➞ press [Data
Registration] ➞ [▼] or [▲] until <3.FAX SETTINGS> appears ➞
press [Set].
Data
Registration
If necessary, see steps 1 to 3 of "Setting Your Machine as a Relay Unit," on p.
6-3.
Set
2
Press [▼] or [▲] until <6.FILE SETTINGS> appears ➞ press
Set
[Set] ➞ [▼] or [▲] until <2.RELAY TX GROUP> appears ➞
press [Set].
If necessary, see steps 4 and 5 of "Setting Your Machine as a Relay Unit," on p.
6-3.
3
Press [▼] or [▲] until <2.CHANGE DATA> appears ➞ press
Set
[Set].
➞
Setting Up and Using a Standard Relay Unit
6
6-7