Polling To Receive At A Preset Time - Canon 3170 Series User Manual

An ITU-T password is a number up to 20 digits long which can
include spaces and the symbols
Set
Use the buttons on the numeric keypad to enter the ITU-T pass-
ABC DEF
1 2 3
word. Then press
GHI JKL MNO
4 5 6
PRS TUV WXY
9
7 8
OPER SYMBOLS
0
Tone
Start / Scan
Press
7.
❏
❏

Polling to Receive at a Preset Time

Follow this procedure to set the fax to poll another fax at a preset time.
Polling faxes at preset times allows you to conduct document transac-
tions later at night when the telephone rates are lower.
Before you set up polling at a preset time, make sure you have per-
formed the following tasks:
❏
The numbers you want to register for dialing must be registered for
One-touch or Coded Speed Dialing buttons. (➞4-6, 4-15)
❏
When you register the One-touch or Coded Speed dialing button,
you must turn on OPTIONAL SETTINGS and set the TX TYPE for
POLLING RX when the other party set subaddress/password, you
have to register an ITU-T subaddress and/or password for the speed
dialing button. (➞4-12, 4-21)
❏
If you have to poll a number that you use regularly, you should
register it once again for another speed dialing button so you can set
the ITU-T subaddress and/or password to match the polling box of
the other party's fax and register the second number for preset
polling.
Chapter 11
.
Set
TEL=
01 CANON, INC.
to start polling the other faxes.
Start/Scan
If the other document is holding the document under a
subaddress, your subaddress must match the other party's
subaddress.
If the other document is holding the document under both a
subaddress and password, then you must poll the fax with
both a matching subaddress and password.
and #.
*
123 4567
Setting Up and Using Polling
11-5