Table of Contents
Advertisement
4. Make sure the document is below the load limit marks for A4/
5. Insert the document fully into the fax until the leading edge of the
If the fax already displays DOCUMENT READY before you set a
document, a small-sized document, such as a STMT-size document, may
have remained in the ADF from a previous fax or copy job. In such a
case, remove the small-sized document from the ADF and then set your
document.
Performing the Document Settings
Canon's original Ultra High Quality (UHQ) imaging technology allows
you to make copies that are very close to the quality of the original
document. For best results, adjust the settings for special documents
before copying.
Follow these guidelines to change a setting:
❏
The lighted indicator tells you the current setting.
5-4
Using the Fax as a Copier
LTR and B4/LGL sizes.
document stops in the ADF.
The fax will display some messages.
MEMORY IN USE
DOCUMENT READY
36%
Chapter 5
Advertisement
Table of Contents
