Selecting The Receive Mode For Printing - Canon FAX-L160 Reference Manual

Registering Remote Reception ID
Follow this procedure if you want to change the default remote reception
ID of 25.
1.
Press [Menu].
2.
Press [ ] or [
then press [OK].
3.
Press [ ] or [
then press [OK].
4.
Press [ ] or [
press [OK].
5.
Press [ ] or [
[OK].
6.
Use the numeric keys to enter a new remote
reception ID (a combination of two characters
using 0 to 9), then press [OK].
7.
Press [Stop/Reset] to return to the standby mode.
Receiving a Fax Remotely
1.
When you receive a call, pick up the external
telephone.
3-26
] to select <FAX SETTINGS>,
] to select <RX SETTINGS>,
] to select <REMOTE RX>, then
] to select <ON>, then press
2.
Use the numeric keys to enter the two-digit
remote reception ID to start reception.
If the machine is set for pulse dialing, press [Tone] to switch to tone dialing
before pressing the remote reception ID.
3.
When the reception is complete, hang up the
telephone.
■

Selecting the Receive Mode for Printing

You can select whether the machine stores all received pages in the
memory before printing them out or prints each page as it is received.
1.
Press [Menu].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <RX PRINT>, then
press [OK].
5.
Press [ ] or [ ] to select desired printing
method, then press [OK].
<MEMORY RX>: Prints after all the pages of the document are received.
<PRINT RX>: Prints each page as it is received.
6.
Press [Stop/Reset] to return to the standby mode.