Setting The Unit Name (Unit Name) - Canon IR3250 Reference Manual

Setting the Unit Name (Unit Name)

You can set a Unit Name (i.e., a person's name, company name, department name, etc.) that will be
printed on the fax paper at the destination end. (See "Setting Whether to Print Information on
Received Documents," in the Reference Guide.)
NOTE
• For information about entering characters, see "Entering Characters Using the Touch Panel Display," in
the User's Guide).
1
Call up the desired screen as follows:
Additional
key → [Communications Settings] → [Fax Settings] → [Unit Name]
Functions
2
Enter a unit name and press the [OK] key.
NOTE
• The Unit Name can have up to 24 characters.
• To use no Unit Name, press the [OK] key without
entering any characters.
• To delete the characters you have entered, press
Clear
the key.
3
Press the [Done] key.
Repeat until the Additional Functions screen closes.
Communications Settings 4-29