Configure The Event Recording/Capturing - HIKVISION iDS-9664NXI-M8/X User Manual

8.6.1 Configure the Event Recording/Capturing

The video recorder can record videos or capture pictures when an IoT alarm occurs.
Steps
1. Click of an added IoT device.
2. Select desired Event Type.
3. Check Enable.
4. Check Trigger Channel you want to record event videos or capture pictures when an alarm
occurs.
5. Click Apply.
6. Configure the event recording or capturing schedule. Here we take the example of configuring
event recording to describe the steps.
1) Go to Storage → Schedule → Record .
2) Select Camera No. and check Enable Schedule. The camera should be the camera you select
in step 4.
3) Select the recording type as Event.
4) Drag the mouse on the time bar to set the event detection recording schedule. Refer to
Configure Recording Schedule for details.
5) Click OK.
Network Video Recorder User Manual
Figure 8-12 Trigger Channel
124