Configure Audio Recording - HIKVISION DS-7600NI-I2 Series User Manual

10.4 Configure Audio Recording

The device would automatically record audios according to the configured recording schedule.
Steps
1. Go to System → Storage Management → Storage Schedule → Audio Recording .
2. Turn on Enable for a channel.
3. Select a schedule type.
Note
If you set Record Schedule as Custom, you can drag the cursor on time bar to set customized
record schedule, or move the cursor on time bar and click
schedule.
4. Click View to view the schedule.
5. Optional: Click under Advanced Settings to set other advanced parameters.
Parameter
Pre-Record
Post-Record
6. Optional: Select channels in the list, and use Batch Schedule Configuration and Batch Advanced
Settings to configure channels in a batch.
7. Click Save.
Network Video Recorder User Manual
Table 10-3 Advanced Parameter Description
The time you set to record before the scheduled time or event. For
example, when an alarm triggers the recording at 10:00, and if you set the
pre-record time as 5 seconds, the channel records at 9:59:55.
The time you set to record after the event or the scheduled time. For
example, when an alarm triggered recording ends at 11:00, and if you set
the post-record time as 5 seconds, it records till 11:00:05.
Description
38
to set specified time