Leadshine CS2RS Series User Manual page 2

Notice
Read this manual carefully before any assembling and using. Incorrect handling of products in this manual
can result in injury and damage to persons and machinery. Strictly adhere to the technical information
regarding installation requirements.
This manual is not for use or disclosure outside of Leadshine except under permission. All rights are
reserved. No part of this manual shall be reproduced, stored in retrieval form, or transmitted by any means,
electronic, mechanical, photocopying, recording, or otherwise without approval from Leadshine. While
every precaution has been taken in the preparation of the book, Leadshine assumes no responsibility for
errors or omissions. Neither is any liability assumed for damages resulting from the use of the information
contained herein.
This document is proprietary information of Leadshine that is furnished for customer use ONLY.
Information in this document is subject to change without notice and does not represent a commitment on
the part of Leadshine. Therefore, information contained in this manual may be updated from time-to-time
due to product improvements, etc., and may not conform in every respect to former issues.
Thank you for purchasing Leadshine CS2RS Series Products
◆
Please read this manual carefully before operating
◆
Please keep this manual appropriately
◆
Record of Revisions
Reversion
V1.00 20190517
V1.01 20191220
V2.00 20200604
CS2RS Series RS485 Closed Loop Stepper Drive User Manual
Data Description of Release
Initial Release
Modified Section 4 and Section 5
Add CS2RS-D1008, modify Section 4.3