Product Specifications; Electrical And Operating Specifications - Leadshine CS2RS Series User Manual

3 Product Specifications

CAUTION






3.1 Electrical and Operating Specifications

3.1.1 Electrical and Operating Specifications
Name
Supply Voltage
Output Current (Peak)
Size (H*W*L mm)
Weight (kg)
Matched Motor
Input Signals
Output Signals
Protection Functions
PC Software
Operating Environment
CS2RS Series RS485 Closed Loop Stepper Drive User Manual
Don't hot plug the motor wiring, encoder wiring and RS232 communication
wiring during power on.
Be sure to check the connections and make sure the power lead polarity is correct,
or there could result in injury or fire.
Be sure wait for 5 minutes or longer to touch drives after turning off power
Be sure to give the power supply voltage dose not exceed the drive's input range.
If using a motor with small phase current, be sure to modify the driver output
current before enabling the motor
CS2RS-D503 CS2RS-D507
20-50VDC 20-50VDC
0.5-3.0A 1.0-7.0A
118*79.5*25.5
0.65
NEMA 8, 11, 14, 17 NEMA 17, 23, 24
Limit +, Limit -, Origin, Quick stop, Enable, JOG +, JOG - and Position Table
Brake, Alarm, In Position, GPIOs
Over Current, Over Voltage, Position Following Error, Encoder Cable Error, etc.
Leadshine ProTuner (coming soon)
Environment Avoid dust, oil ,fog and corrosive gases
Operating
0-50℃ (32 F – 122 F)
Temperature
Storage Temperature -20℃-65℃ (-4 F – 149 F)
Humidity 40-90%RH
Vibration 10-55Hz/0.15mm
Mount Vertical or horizontal mounting
CS2RS-D1008
30-100VDC or 18-80VAC
2.1-8.0A
151*97*53
0.92
-6-
NEMA34