GCC Technologies RX II Series User Manual page 88

Back to home:
The carriage will return to the original position when this option is selected.
Auto Cut off:
This feature allows users to set the cutter to cut off the media after the completion of each job
making it easy to set up an unattended workflow for mass production. The material will be cut
off automatically once you click the Auto Cut off function on GCC driver and set the distance
between the cutting image and the cut off line.
The default is 10mm meaning the material will be cut off after 10mm of the image. The value for
the cut off function is adjustable. You can set the value between 0mm-100mm depending on
your need.
Vector Function
1. Normal:
This is the default Vector Function setting. The cutting order depends on the order of the
graphics created in the application software.
2. X sorting:
The cutting order is based on the next closest object on the x-axis from the origin.
The cutting order of the sample below will be 1,2,3,4 (please refer to figure 4-20).
4
2
Operation
3
Figure 4-19
1
4-11
RX II Series User Manual