GCC Technologies RX II Series User Manual page 188

Step 7 Back to Adobe Illustrator, Click Multi-Copy on GreatCut under File.
Step 8 Complete the Number in X/Y (the number of copies desired on the X/Y axis) and
Distance in X/Y (distance between each copy) settings then click OK. Confirm that the
value of Distance in X/Y must be the same with step 6.
Note: The spacing of vertical & horizontal (Offset X & Y) should be ≥ 20mm or = 0mm; users are
advised to set the Distance in X/Y as 0 mm to remove the space between each copy to
avoid the waste of materials.
GreatCut Plug-In A-6
RX II User Manual