GCC Technologies RX II Series User Manual page 31

4. When blade holder and blade length tests are finished, the screen will show you to
what degree (the unit of the value following "CW" or "CCW" is "circle") and in which
direction [CW (clockwise) or CCW (counterclockwise)] you should turn the adjustment
knob.
EG, Turn CW 5 is telling you that you should turn the knob for 5 units clock-wisely
(Figure 2-28, Figure 2-29).
5. The screen will show "Adjustment completes" when the value on the screen is 0, the
blade length is perfect and no more adjustment needs to be made. Press "Enter" now
to complete the process and you may start cutting at this point.
Figure 2-28
Installation
2-18
RX II Series User Manual
Figure 2-29