GCC Technologies RX II Series User Manual page 161

Note: The difference amount Number of outputs, Number of copies, and Step count in the
Output window.
1. When Number of outputs is set as 2, the square and the triangle will be cut 1 time
and then the square and the triangle will be cut 1 time at next position.
2. When Number of copies is set as 2, the square and the triangle will be cut 2 times at
the same position.
3. When Step count is set as 2, the square will be cut 2 times at the same position and
then the triangle will be cut will be cut 2 times at the same position.
GreatCut Plug-In A-6
RX II User Manual