Segmental Positioning
The system will create the as shown in the picture below
Segmental Positioning will be applied to Multiple Copies when the object to be copied is of large
size (with the length or width over 200mm) to increase the accuracy of registration mark
detection.
CorelDRAW Plug-In
For precise cutting quality, it is suggested to select "Segmental
Positioning" when you are working on an extra long or
large-sized image to increase cutting accuracy.
Segmental Positioning
l
X Step: The distance of intermediate position on the X axis
l
Y Step: The distance of intermediate position on the Y axis
à Range: 200mm~600mm
à Optimized Setting: Less than 500mm
Figure A3-9
Segmental Positioning
Figure A3-10
A-4
RX II Series User Manual