GCC Technologies RX II Series User Manual page 55

Step 10 Put your name in the Name column and enter the 25-letter software key shown
on the DVD front cover to the Serial column and press "OK" to complete the
activation.
Step 11 Sure Cuts A Lot is ready to use.
Note
 If you use a trial version to output graphics, meaning you do not enter the
software key to activate the Sure Cuts A Lot mentioned above, there will be
two extra lines cut through the design, therefore, make sure the Sure Cuts
A Lot software is activated before implementing cutting jobs.
Installation
2-42
RX II Series User Manual