GCC Technologies RX II Series User Manual page 157

Note:
1. To save your materials, in addition to amending object margins, you can also adjust the
length of the registration marks (5mm minimum) when you apply the above function(see
table 1 for suggestions based on different material sizes). The smaller the size is, the smaller
the distance between the object and the registration marks is (see the figures below).
Page size
(unit: mm)
A6 (105 x 148)
A5 (148 × 210)
A4 (210 × 297)
A3 (297 × 420)
A2 (420 × 594)
A1 (594 × 841) and above
Table 1
*25mm is the suggested value for the registration mark length
2. The size of the registration marks would affect the accuracy of registration mark detection so
please make sure the amount you enter is reasonable.
GreatCut Plug-In
Suggested mark length
(unit: mm)
5
8
11
16
23
25*
A-6
RX II User Manual
Area to be cut