Trouble Shooting; Non-Operational Problems - GCC Technologies RX II Series User Manual

Chapter 7 Trouble Shooting
This chapter is to help you correct some common problems you may come across. Prior to
getting into the details of this chapter, please be sure that your application environment is
compatible with the cutting plotter.
Note:
Before having your cutting plotter serviced, please
make certain that the malfunction is in your cutting
plotter, not the result of an interface problem or a
malfunction in your computer or a software problem.
Possible Causes:
7.1

Non-Operational Problems

Check the following first:
n
Does the AC power cord plug in properly?
n
Does the AC power cord connected to the power connector properly?
n
Does the power LED still illuminate?
Solutions:
If the LCM is able to display the message, the cutting plotter should be in a normal
condition. Switch off the cutting plotter and turn it on again to see if the problem still
existing.
If the LCM is not able to display any message, contact the technician from your dealer.

Trouble Shooting

Why is the cutting plotter not functioning?
7-1
RX II Series User Manual