Installing The Driver - GCC Technologies RX II Series User Manual

2.8.1.2 Installing the driver

Use the USB One-click Installation for quick driver installation. Follow the simple
steps below for driver setup.
Caution!!

If you are using Windows 7 and above as your operating system,
make sure you log in using the "Administrator" account.
Step 1 Put the installation DVD into your CD-ROM.
device is connected before you start the driver installation.
Step 2 Choose the model you want to install from the driver list and click on Windows
Driver (Win 7 and Above) (Automatic Detection) or Windows Driver (Win 7
and Above) (Manual Selection) to start installing the Driver and AAS plug-in.
Click "Next" to start the driver installation.
Step 3
Step 4 If you were Windows 7 and above users, please click on the red words to
instruct you how to disable Windows Update to allow success driver
installation. And then click OK to next step.
Installation
Please make sure that the USB
2-20
RX II Series User Manual