Step 2
Press On/Off line and then MISC button on your control panel.
Step 3
Go to the DHCP page and select Enable through the up and down arrow keys,
then press Enter.
Step 4
The IP Address will be shown on the screen automatically. Please make notes of
it.
II. Ethernet Connectivity Setup
There are two ways to output your plot through Ethernet. If you output your plot through
GreatCut, please follow the instruction I. Output through GreatCut; if you output your
plot through Adobe Illustrator or CorelDRAW, please follow the instruction II. Output
through the Ethernet Driver.
Installation
1
2
2-27
RX II Series User Manual