5.2.3 Automatic Distinction of the Plot Direction
For the convenience of users, RX II series automatically detects the feeding direction of the
material when performing contour cutting. Figure 5-1 shows the Registration Mark detection
sequence when the material is fed in the standard way (1->2->3->4) while Figure 5-2 is how
RX II series detects registration marks (3->4->1->2) when the material is reversely fed. RX II
series is able to detect registration marks and performs contour cutting however users feed
the media.
Direction detection steps:
(Please see Figure 5-2)
a. Detects the position of the 3rd Registration Mark
b. Proceeds to the 4th Registration Mark to detect the direction
(The direction detection procedure will be performed by the detection of 4th Registration
Mark)
c. The information is reflected in the driver and recalculated before output
d. The registration mark detection and object output process is implemented
Figure 5-1
Automatic-Aligning System
Figure 5-2
5-5
RX II series User Manual
(Registration Mark detection
sequence: 3->4->1->2)