GCC Technologies RX II Series User Manual page 77

Cut off Paper To cut off the material automatically when the job is completed,
you need to use the arrow keys to move the carriage to the
position you want to cut off the material and then press the "cut
off" button and the auto cut off system will cut-off the material.
Cut off Type To perform auto cut-off by auto cut off system or Blade holder
cut off.
Users can define the cut off force/speed when Blade holder cut
off is selected.
Note: Blade holder cut off function is using a blade to cut-off
the material. An extension holder and a blade holder with
blade are required to perform the Blade holder cut off function.
The Control Panel
[ CUT OFF ]
3-11
RX II Series User Manual
Auto cut off Auto cut off
system, Blade system
holder cut off