Xconfiguration Cameras Camera [1] Focus Mode; Xconfiguration Cameras Camera [1] Mirror; Xconfiguration Cameras Camera [1] Whitebalance Mode; Xconfiguration Cameras Camera [1] Whitebalance Level - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration Cameras Camera [1] Focus Mode

Define the camera focus mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n
where
: Unique ID that identifies the camera. Range: 1..1
n
: Auto/Manual
Mode
Auto: The camera will auto focus once a call is connected, as well as after moving the
camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set
the right focus; then auto focus is turned off to prevent continuous focus adjustments of
the camera.
Manual: Turn the autofocus off and adjust the camera focus manually.

xConfiguration Cameras Camera [1] Mirror

With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies both to
the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n
where
: Unique ID that identifies the camera. Range: 1..1
n
: Auto/Off/On
Mirror
Auto: If the camera detects that it is mounted upside down, the image is automatically
mirrored. If the camera cannot auto-detect whether it is mounted upside down or not,
the image is not changed.
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xConfiguration
Focus Mode: Mode
Mirror: Mirror
xCommand

xConfiguration Cameras Camera [1] Whitebalance Mode

Define the camera white balance mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera
where
: Unique ID that identifies the camera. Range: 1..1
n
: Auto/Manual
Mode
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.

xConfiguration Cameras Camera [1] Whitebalance Level

Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be set
to manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Cameras Camera
where
: Unique ID that identifies the camera. Range: 1..1
n
: Integer (1..16)
Level
The white balance level.
38
API Reference Guide
xStatus Appendices
n Whitebalance Mode: Mode
n Whitebalance Level: Level
Copyright © 2017 Cisco Systems, Inc. All rights reserved.