Table of Contents
Advertisement
46
Process Image
Values must be input in raw data format!
The values for the lower and upper limiting value must be entered in raw data
format, i.e., if a user scaling is set, it must be taken into account for the entry of
the limiting values. If in addition a number notation in the (+/−) range is selected,
the limiting values must be converted into equivalent values for a positive number
range.
4.5.2.2
"Offset/Gain" Page
Figure 12: "Offset/Gain" Page
The Offset/Gain page enables the setting of the offset and amplification values
of the user and manufacturer scalings. The [Write] button is used to change and
transfer the following parameters to the I/O module:
Manual
Version 1.3.0
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR
WAGO-I/O-SYSTEM 750 XTR
Advertisement
Table of Contents
