44
Process Image
values to the I/O module, click [Write]. The change icon goes away, the [Write]
button is grayed out again.
The Process Data page displays information about the process value of the I/O
module and displays status messages.
4.5.2.1
"Settings" Page
Figure 11: "Settings" Page
You can set general I/O module parameters on the Settings page.
The [Write] button is used to change and transfer the following parameters to the
I/O module:
Manual
Version 1.3.0
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR
WAGO-I/O-SYSTEM 750 XTR