Removing The I/O Module; Figure 15: Snap The I/O Module Into Place (Example) - WAGO 750-563/040-000 Manual

52 Mounting
2. Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.

Figure 15: Snap the I/O Module into Place (Example)

With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or
to the previous or possibly subsequent I/O module are established.
5.2.2

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.
Manual
Version 1.3.0
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR
WAGO-I/O-SYSTEM 750 XTR