About This Document; Purpose Of This Document; Scope; Target Groups And Structure Of These Operating Instructions - SICK deTec4 Core Vibes Operating Instructions Manual

1

ABOUT THIS DOCUMENT

1 About this document
1.1

Purpose of this document

1.2

Scope

1.3

Target groups and structure of these operating instructions

6 O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Vibes
These operating instructions contain information required during the life cycle of the
safety light curtain.
These operating instructions are available to all those who work with the safety light
curtain.
Please read these operating instructions carefully and make sure that you understand
the content fully before working with the safety light curtain.
These operating instructions only apply to the deTec4 Core Vibes safety light curtain
with one of the following type label entries in the "Operating Instructions" field:
• 8024466
This document is included with the following SICK part numbers (this document in all
available language versions):
8024466
These operating instructions are intended for the following target groups: Project devel‐
opers (planners, developers, designers), installers, electricians, safety experts (e.g., CE
authorized representatives, compliance officers, persons who test and approve the
application), operators, and maintenance personnel.
The structure of these operating instructions is based on the life cycle phases of the
safety light curtain: Project planning, mounting, electrical installation, commissioning,
operation, and maintenance.
In many applications, the target groups are assigned as follows to the manufacturer
and the organization operating the machine in which the safety light curtain is inte‐
grated:
Area of responsibility Target group
Manufacturer Project developers
(planners, developers,
designers)
Installers
Electricians
Safety specialists
Operating company Operator
Maintenance person‐
nel
1) Chapters not listed here are intended for all target groups. All target groups must take into account the
safety and warning instructions of the complete operating instructions!
Special chapters of these operating instruc‐
tions 1)
"Project planning", page 16
"Technical data", page 54
"Accessories", page 62
"Mounting", page 33
"Electrical installation", page 39
"Project planning", page 16
"Commissioning", page 42
"Technical data", page 54
"Checklist for initial commissioning and com‐
missioning", page 67
"Operation", page 47
"Troubleshooting", page 50
"Maintenance", page 48
"Troubleshooting", page 50
"Ordering information", page 60
8024467/2019-06-18 | SICK
Subject to change without notice