Table of Contents
Advertisement
Ingeteam
10. AC connection
This chapter explains the requirements and process for wiring the AC cabling to the unit.
Read carefully before starting the connection process.
10.1. Safety instructions for the AC connection
Consult section "3. Safety" and the following safety instructions before working in the unit.
Ingeteam accepts no liability for any damages caused by incorrect connection.
Use the Personal Protective Equipment specified in the section "3.2. Personal Protective Equipment
(PPE)".
10.2. Wiring requirements for connecting AC connection
The metal parts of the inverter (ground of the unit) are connected electrically to the grounding point of the quick
connector for AC connection.
To guarantee the safety of persons, for the unit to function correctly and comply with the applicable standards, this
point must be connected to the ground of the installation.
The ground and phase cables are connected from the grid to the inverter using a three-terminal connector.
The maximum diameter of the wiring conduit that can be used with the connector is 14 mm.
If the inverter and the grid connection point are far enough apart to require the use of cables with a larger gauge,
an external distribution box should be used close to the inverter to make this connection.
10.3. AC connection process
1.
Wire the connector observing the instructions printed on it: line (L), neutral (N) and ground (ground
symbol).
28
ABF2011IQE01_A - Installation and usage manual
AC connection
Advertisement
Table of Contents
