Delete Clips; Reel Name; Clip Name; Clip Naming-Two Examples - AJA Ki Pro Installation And Operation Manual

38

16.2 DELETE CLIPS

17.0 REEL NAME

17.2 CLIP NAME

16.2 DELETE CLIPS
This parameter can be used to delete all of the clips on the media.
DELETE ALL (default)
KEEP CLIPS
The Ki Pro Storage Module can be used to hold data other than Apple ProRes 422
QuickTime recordings. If other files are saved to the Ki Pro Storage Module, they
should be placed outside of the "AJA" folder. Any material inside of the "AJA" folder
will be erased if a MEDIA>Delete Clips>DELETE ALL is performed.
17.0 REEL NAME
This parameter determines the reel name associated with all clips generated while
using this setting. The reel name is a number between 001 and 999. It is historically
linked to the naming conventions used for film and tape-based media. The REEL
NAME is an incrementing three digit value that works with EDLs. For this reason, the
parameter does not have a "NONE" selection—all clips will be associated with a REEL
NAME. The REEL NAME parameter is also the name of the media as it will appear
when the storage device (storage module or ExpressCard/34) is mounted on a Mac
OSX desktop (and media was formatted by the user).
001 to 999
(default = 001)
17.2 CLIP NAME
This parameter determines the clip name associated with all clips generated while
using this setting. The clip name is either "Clip" or "SC" .
SC (default)
Clip
Clip Naming—Two Examples
Two examples are presented below showing how resulting clip names are generated.
Each example is based on the collective settings for these parameters:
•
REEL NAME
•
CLIP NAME
•
CLIP NUMBER
•
CLIP NUMBER APPEND
•
ALPHA APPEND VALUE
In both examples that follow, "TK" is a default append to the naming convention just
prior to the auto-incrementing TK value (which can be manually overridden via
parameter 17.8 Take).
Delete all clips on the storage device when
DELETE CLIPS is pressed or Adjust up arrow is
pressed and held for 2 seconds
No action (do not delete clips)
Press ADJUST button up or down to change the
REEL NAME value from 001 to 999.
Clips generated will have filenames beginning with "SC"
Clips generated will have filenames beginning with "Clip"