Format Media; Delete Clips; Reel Name; Clip Name - AJA Ki PRO rack Operation Manual

16.1 FORMAT MEDIA

16.2 DELETE CLIPS

17.0 REEL NAME

17.2 CLIP NAME

Clip Naming—Two
Examples
Ki Pro Rack v4.2
This parameter is used to format the currently selected storage device. These are the
available options:
KEEP MEDIA (default)
FORMAT MEDIA
This parameter can be used to delete all of the clips on the media. These are the available
options:
KEEP CLIPS (default)
DELETE ALL
The Ki Pro Storage Module can be used to hold data other than Apple ProRes 422
QuickTime recordings. If other files are saved to the Ki Pro Storage Module, they should
be placed outside of the "AJA" folder. Any material inside of the "AJA" folder will be erased
if a MEDIA>Delete Clips>DELETE ALL is performed.
This parameter determines the reel name associated with all clips generated while using
this setting. These are the available options:
001 to 999
(default = 001)
The reel name is a number between 001 and 999. It is historically linked to the naming
conventions used for film and tape-based media. The REEL NAME is an incrementing
three digit value that works with EDLs. For this reason, the parameter does not have a
"NONE" selection—all clips will be associated with a REEL NAME. The REEL NAME
parameter is also the name of the media as it will appear when the storage module is
mounted on a computer desktop (and media was formatted by the user). Note: the REEL
NAME cannot be changed once a recording session starts on the storage unit without
reformatting the drive.17.2 CLIP NAME
This parameter determines the clip name associated with all clips generated while using
this setting. The clip name is either "Clip" or "SC". These are the available options:
SC (default)
Clip
The following two examples show how resulting clip names are generated. Each example
is based on the collective settings for these parameters:
• REEL NAME
• CLIP NAME
• CLIP NUMBER
• CLIP NUMBER APPEND
• ALPHA APPEND VALUE
No action (do not format the media device selected).
Format the selected media device (you will be prompted Y/
N?). If no media is inserted in the Ki Pro, the message "No
Storage" is displayed.
No action (do not delete clips).
Delete all clips on the storage device when DELETE CLIPS is
pressed or Adjust up arrow is pressed and held for 2 seconds.
If no media is inserted in the Ki Pro, the message "No
Storage" is displayed.
Press ADJUST button up or down to change the REEL NAME
value from 001 to 999.
Clips generated have filenames beginning with "SC".
Clips generated have filenames beginning with "Clip"
39 www.aja.com