Power Connector; Storage; Formatting Media - AJA Ki Pro Ultra Installation And Operation Manual

IMPORTANT: Not all RS-422 devices have been tested with Ki Pro Ultra, so AJA cannot
For details on using RS-422 machine control setup, see
page

Power Connector

On the back of Ki Pro Ultra are two standard 4-pin male XLR connectors for
supplying 12-Volt DC power to the unit. You can use either the supplied AC
Adapter or furnish your own battery source. Since the connector is an industry
standard pinout, choices are varied and flexible. Many 3rd party vendors offer
products using this standardized power connector.
• Pin 1: -
• Pin 4: +
• Pins 2 and 3: not used
Caution!
unit, remove the 4-pin XLR power connector to ensure disconnection. Refer all
servicing to qualified service personnel. Servicing is required when the device
has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the device, the device has been
exposed to rain or moisture, does not operate normally, or has been dropped

Storage

Ki Pro Ultra Plus can record to Pak Media, a form of removable SSD media. The
media is formatted either as HFS+ (native to the Mac OS file system,) or ExFAT
(suitable for PCs. Using the Pak Dock, Pak Media with the correct formatting can
be directly mounted on a Mac or PC for immediate editing and file access.
Caution!
power while recording, can result in an unrecoverable data loss.

Formatting Media

Pak Media is provided pre-formatted. However, you may want to format media
that has already been used, or name media and format it during your shoot. To
format Pak Media, the media must be inserted into a Media Slot. Once the media
is mounted:
1. Press the MEDIA button.
2. Rotate the User Interface Control Knob until you see the menu parameter
16.0 File System Formatting:
3. Push in the User Interface Control Knob.
4. Rotate the User Interface Control Knob to choose the type of file system
formatting (HFS+ or ExFAT).
5. Push in the User Interface Control Knob.
6. Rotate the User Interface Control Knob until you see the menu parameter
16.1 Format Media:
Ki Pro Ultra File Based Recorder/Player v3.3r1
definitively say which devices may or may not communicate as expected with
Ki Pro Ultra when operated under RS-422 remote control. To see which devices or
nonlinear editors have been tested operating under RS-422 control, refer to the
latest Ki Pro Ultra Release Notes document.
52.
Ki Pro Ultra has no user-serviceable parts. To remove power from the
Failure to properly mount or dismount media, or an unexpected loss of
"35.2 Remote Control" on
17 www.aja.com