Power Connector (Back Of Unit); Storage; Removable Storage Modules (Hdd Or Ssd) - AJA Ki PRO rack Operation Manual

AES Digital Audio Inputs and
Outputs:
Analog Audio 2-Channel
Balanced Input and Output:

Power Connector (back of unit)

Storage

Removable Storage
Modules (HDD or
SSD)
Ki Pro Rack v4.2
operations; the output is only for use during playback, as might be used for dubbing
content to another device with matching timecode. For timecode to multiple Ki Pro Rack
units, the use of a timecode generator and a timecode distribution amplifier is
recommended.
AES digital audio connections consist of four BNC input connectors,
two channels per connector (1/2, 3/4, 5/6, 7/8). AES outputs also
consist of four BNC connectors with the same two channels per
connector.
Four XLRs, 2 female for input and 2 male for output, provide 2
channels of balanced audio. Audio is high-quality 24-bit A/D
input and D/A output at 48kHz. Level adjustments are made
via software. Software level adjustments for analog audio
(parameter 4.1) apply to balanced audio (XLR).
Ki Pro Rack includes two redundant 100-240 VAC 50/60 Hz input connectors. The
power inputs are auto-sensing and will adjust to any voltage within the 100-240
VAC range. Use the supplied power cords to connect either connector to an AC
source for non-redundant power or use both connectors/cords for redundancy. If
redundancy is desired, connect the two power cords to different AC branch
circuits in case one circuit shuts off.
Record hours of media to portable removable hard-drive storage modules with built-in
FireWire 800. Ki Pro Rack media may also be used with Windows OS editing systems
when third party software, such as MediaFour's MacDrive, is installed. Both media types
mount on your OSX desktop for immediate editing and file access.
Caution!
Failure to properly mount or dismount media, or an unexpected loss of power while
recording, can result in an unrecoverable data loss.
The Ki Pro Solid State Storage Module (SSD) is recommended for mobile environments
where shock-proof sturdiness may be needed. The Ki Pro SSD Storage Module offers the
ultimate in media reliability. For non-mobile applications you can also use 250GB HDD
Storage Modules.
You may also choose to purchase extra SSD or HDD Storage Modules so you can quickly
load and unload media from the Ki Pro Rack unit while on set.
Storage Modules can be powered via the FireWire 800 cable, or via an AC adapter
(available separately).
Check with your AJA dealer or the AJA website for Storage Module offerings as capacities
and models may change.
18 www.aja.com