Connectors - AJA Ki Pro Ultra Installation & Operation Manual

Slot LED Status Indicator:
Head Phone Jack:

Connectors

Ki Pro Ultra v1.2r1
Red—audio source amplitude is too hot and the signal is clipping at its signal peaks. You
should reduce the input gain at its source (camera, mixer or source equipment supplying
the signal).
These LED 1 and 2 states indicate the status of the media slots, S1 and S2:
• LED highlighted/on: selected media
• LED not highlighted/off: inactive media, okay to eject or no media inserted
• LED flashing: recording in progress
• On power up, slot S1 is the initial selection.
1/8" (3.5mm) miniature stereo TRS connection for standard stereo headphones.
The functions of Ki Pro Ultra's inputs and outputs depend on the operational mode. Ki Pro
Ultra's active input (the one to be recorded) is selected by front panel or web browser
control. Ki Pro Ultra's outputs are active all the time.
Figure 3. Ki Pro Ultra Connectors
17 www.aja.com