Rear Panel Connectors - AJA Ki Pro Ultra Installation And Operation Manual

recordings. When the monitoring outputs are set to crop a signal to 1920x1080, a
graticule is applied to the scaled image on the LCD to alert the user.
VU Meters
A video overlay is provided on the LCD to display audio VU meters. Meters are
color-coded to report signal strength:
• Green - audio source signal level is in the "safe" area (no clipping). Vertically,
the green LEDs also show the signal strength, so you can see if the signal level
is low. Generally, it's preferred to have the signal near the top of the green or
even occasionally peaking into the yellow LEDs.
• Yellow - audio source signal levels are at the peak edge of the safe area before
clipping will occur.
• Red - audio source amplitude is too hot and the signal is clipping at its signal
peaks. You should reduce the input gain at its source (camera, mixer or source
equipment supplying the signal).
Slot LED Status Indicator
These LED 1 and 2 states indicate the status of the media slots, S1 and S2:
• LED highlighted/on: selected media
• LED not highlighted/off: inactive media, okay to eject or no media inserted
• LED flashing: recording in progress
On power up, slot S1 is the initial selection.
Head Phone Jack
1/8" (3.5mm) miniature stereo TRS connection for standard stereo headphones.

Rear Panel Connectors

The functions of Ki Pro Ultra's inputs and outputs depend on the operational
mode. Ki Pro Ultra's active input (the one to be recorded) is selected by front
panel or web browser control. Ki Pro Ultra's outputs are active all the time.
Figure 3. Ki Pro Ultra Connectors
SDI Fiber I/O
Inputs 1-4
Outputs 1-4
Video
Reference
(looping)
Linear
Time
Code
I/O
HDMI
HDMI
input
Output
Ki Pro Ultra File Based Recorder/Player v3.3r1
SDI Inputs 1-4
RS-422
Ethernet
Machine
Analog
LAN
Control
Audio
Input
(25-pin)
Analog Audio
SDI Outputs 1-4
Monitor Out
Digital
Analog
Audio
Audio
I/O
Output
(25-pin)
(25-pin)
14
SDI Monitor Out
Redundant DC
Power Supply
Inputs
www.aja.com