Xconfiguration Standby Bootaction; Xconfiguration Standby Standbyaction; Xconfiguration Standby Wakeupaction - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration Standby BootAction

Define the camera position after a restart of the codec.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby BootAction:
where
: None/DefaultCameraPosition/RestoreCameraPosition
BootAction
None: No action.
RestoreCameraPosition: When the video system restarts, the camera returns to the
position that it had before the restart.
DefaultCameraPosition: When the video system restarts, the camera moves to the
factory default position.

xConfiguration Standby StandbyAction

Define the camera position when going into standby mode.
Requires user role: ADMIN, INTEGRATOR
Default value: PrivacyPosition
USAGE:
xConfiguration Standby StandbyAction:
where
: None/PrivacyPosition
StandbyAction
None: No action.
PrivacyPosition: When the video system enters standby, the camera turns to a sideways
position for privacy.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xConfiguration
BootAction
StandbyAction
xCommand

xConfiguration Standby WakeupAction

Define the camera position when leaving standby mode.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby WakeupAction:
where
: None/RestoreCameraPosition/DefaultCameraPosition
WakeupAction
None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to
the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to
the factory default position.
73
API Reference Guide
xStatus Appendices
WakeupAction
Copyright © 2017 Cisco Systems, Inc. All rights reserved.