Xconfiguration Serialport Loginrequired; Sip Configuration; Xconfiguration Sip Authentication Username; Xconfiguration Sip Authentication Password - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration SerialPort LoginRequired:
where
: Off/On
LoginRequired
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xConfiguration
LoginRequired
xCommand

SIP configuration

xConfiguration SIP Authentication UserName

This is the user name part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Authentication UserName: "UserName"
where
: String (0, 128)
UserName
A valid username.

xConfiguration SIP Authentication Password

This is the password part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP Authentication Password: "Password"
where
: String (0, 128)
Password
A valid password.
69
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.