H323 Configuration; Xconfiguration H323 Authentication Mode; Xconfiguration H323 Authentication Loginname; Xconfiguration H323 Authentication Password - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

H323 configuration

xConfiguration H323 Authentication Mode

Define the authenticatin mode for the H.323 profile.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration H323 Authentication Mode:
where
: Off/On
Mode
Off: The system will not try to authenticate itself to a H.323 Gatekeeper, but will still try a
normal registration.
On: If an H.323 Gatekeeper indicates that it requires authentication, the system will try
to authenticate itself to the gatekeeper. Requires the H323 Authentication LoginName
and H323 Authentication Password settings to be defined on both the codec and the
Gatekeeper.

xConfiguration H323 Authentication LoginName

The system sends the H323 Authentication Login Name and the H323 Authentication Password
to an H.323 Gatekeeper for authentication. The authentication is a one way authentication from
the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the
H.323 Gatekeeper indicates that no authentication is required, the system will still try to register.
Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration H323 Authentication LoginName: "LoginName"
where
: String (0, 50)
LoginName
The authentication login name.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xConfiguration
Mode
xCommand

xConfiguration H323 Authentication Password

The system sends the H323 Authentication Login Name and the H323 Authentication Password
to an H.323 Gatekeeper for authentication. The authentication is a one way authentication from
the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the
H.323 Gatekeeper indicates that no authentication is required, the system will still try to register.
Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration H323 Authentication Password: "Password"
where
: String (0, 50)
Password
The authentication password.

xConfiguration H323 CallSetup Mode

Defines whether to use a Gatekeeper or Direct calling when establishing H.323 calls.
Direct H.323 calls can be made also when H323 CallSetup Mode is set to Gatekeeper.
Requires user role: ADMIN
Default value: Gatekeeper
USAGE:
xConfiguration H323 CallSetup Mode:
where
: Direct/Gatekeeper
Mode
Direct: You can only make an H.323 call by dialing an IP address directly.
Gatekeeper: The system uses a Gatekeeper to make an H.323 call. When choosing this
option, the H323 Gatekeeper Address must also be configured.
44
API Reference Guide
xStatus Appendices
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.