Video Commands; Xcommand Video Activespeakerpip Set; Xcommand Video Input Setmainvideosource; Xcommand Video Layout Layoutfamily Set - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

Video commands

xCommand Video ActiveSpeakerPIP Set

Sets position for the active speakers PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video ActiveSpeakerPIP Set Position:
where
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
Position
UpperRight
Select one of the predefined positions.

xCommand Video Input SetMainVideoSource

Set which input source is the main video source. You can identify the source either by the
identifier of the connector that it is connected to; or by the identifier of the source itself.
This command requires the use of one, and only one, of these parameters: ConnectorId or
SourceId.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand Video Input SetMainVideoSource [ConnectorId: ConnectorId] [SourceId:
SourceId]
where
: Integer (1..3)
ConnectorId
The identifier (ID) of the connector. Connector [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Connector. The connector ID is also printed
on the codec connector panel.
: Integer (1..3)
SourceId
The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Source.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration
Position
xCommand xCommand

xCommand Video Layout LayoutFamily Set

Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [CallId: CallId]
LayoutFamily: LayoutFamily [CustomLayoutName: "CustomLayoutName"]
where
: local/remote
Target
Select if the target is the local layout or the remote layout.
: Integer (0..65534)
CallId
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
: auto/custom/equal/overlay/prominent/single
LayoutFamily
Select a layout family.
: String (1, 128)
CustomLayoutName
Enter a name for the layout.
130
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.