Xcommand Callhistory Recents; Camera Commands; Xcommand Camera Positionreset; Xcommand Camera Positionset - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand CallHistory Recents

Retrieve aggregated information on previous calls made on the video system.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory Recents [Filter: Filter] [Offset: Offset] [Limit: Limit]
[DetailLevel: DetailLevel] [SearchString: "SearchString"] [CallHistoryId:
CallHistoryId] [Order: Order]
where
: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/
Filter
UnacknowledgedMissed
You can filter which calls to retrieve.
: Integer (0..65534)
Offset
Sets the call from which to start.
: Integer (0..65534)
Limit
Defines the amount of calls in the output.
: Basic/Full
DetailLevel
Sets the level of detail for the information on these calls.
: String (0, 255)
SearchString
Allows you to set the command to apply to a specified display name or call back
number.
: Integer (0..65534)
CallHistoryId
CallHistoryId for the call in question.
: OccurrenceTime/OccurrenceFrequency
Order
Define the order in which the previous calls are presented.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xCommand xCommand

Camera commands

xCommand Camera PositionReset

Reset the camera position to default position.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera PositionReset [Axis: Axis] CameraId:
where
: All/Focus/PanTilt/Zoom
Axis
Select which function to reset. If not specified all are reset.
: Integer (1..1)
CameraId
The ID of the camera preset you want to reset.

xCommand Camera PositionSet

Set the camera position.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera PositionSet CameraId:
Tilt] [Zoom: Zoom]
where
: Integer (1..1)
CameraId
The ID of the camera preset you want to reset.
: Integer (0..65535)
Focus
Focus the camera near or far.
: Integer (-10000..10000)
Pan
Move the camera to the left or right.
: Integer (-2500..2500)
Tilt
Move the camera up or down.
: Integer (0..8500)
Zoom
Zoom in or out.
101
API Reference Guide
xStatus Appendices
CameraId
CameraId [Focus: Focus] [Pan: Pan] [Tilt:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.