Xcommand Camera Preset List; Xcommand Camera Preset Remove; Xcommand Camera Preset Show - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Camera Preset List

List information about available camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset List CameraId:
DefaultPosition]
where
: Integer (1..1)
CameraId
Only list presets for the specified camera.
: False/True
DefaultPosition
List default positions only, or only those that are not default positions.

xCommand Camera Preset Remove

Remove a camera preset.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Remove PresetId:
where
: Integer (1..35)
PresetId
The ID of the camera preset you want to remove.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration
CameraId [DefaultPosition:
PresetId
xCommand xCommand

xCommand Camera Preset Show

Shows the preset details for the requested PresetId.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Show PresetId:
where
: Integer (1..35)
PresetId
The ID of the camera preset you wish to see.
103
API Reference Guide
xStatus Appendices
PresetId
Copyright © 2017 Cisco Systems, Inc. All rights reserved.