Xconfiguration Provisioning Externalmanager Alternateaddress; Xconfiguration Provisioning Externalmanager Protocol; Xconfiguration Provisioning Externalmanager Path; Xconfiguration Provisioning Externalmanager Domain - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration Provisioning ExternalManager AlternateAddress

Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager
(CUCM) and an alternate CUCM is available for redundancy. Define the address of the alter-
nate CUCM. If the main CUCM is not available, the endpoint will be provisioned by the alternate
CUCM. When the main CUCM is available again, the endpoint will be provisioned by this CUCM.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager AlternateAddress: "AlternateAddress"
where
: String (0, 64)
AlternateAddress
A valid IPv4 address, IPv6 address or DNS name.

xConfiguration Provisioning ExternalManager Protocol

Define whether to use the HTTP (unsecure communication) or HTTPS (secure communication)
protocol when sending requests to the external manager / provisioning system.
The selected protocol must be enabled in the NetworkServices HTTP Mode setting.
Requires user role: ADMIN, USER
Default value: HTTP
USAGE:
xConfiguration Provisioning ExternalManager Protocol:
where
: HTTPS/HTTP
Protocol
HTTPS: Send requests via HTTPS.
HTTP: Send requests via HTTP.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xConfiguration
Protocol
xCommand

xConfiguration Provisioning ExternalManager Path

Define the Path to the external manager / provisioning system. This setting is required when
several management services reside on the same server, i.e. share the same External Manager
address.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Path: "Path"
where
: String (0, 255)
Path
A valid path to the external manager or provisioning system.

xConfiguration Provisioning ExternalManager Domain

Define the SIP domain for the VCS provisioning server.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Domain: "Domain"
where
: String (0, 64)
Domain
A valid domain name.
66
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.