Systemunit Commands; Xcommand Systemunit Boot; Xcommand Systemunit Factoryreset - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

SystemUnit commands

xCommand SystemUnit Boot

Reboot the system.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand SystemUnit Boot [Action: Action]
where
: Restart/Shutdown
Action
As a default the system restarts after a reboot. By selecting Shutdown, the system will
not restart.
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xCommand xCommand

xCommand SystemUnit FactoryReset

Reset the codec to factory default settings. The call logs are deleted and all system parameters
are reset to default values. All files that have been uploaded to the codec are deleted. Option
key(s) are not affected.
As a default the system restarts after the factory reset, but other behaviour can be forced by
selecting a different TrailingAction.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit FactoryReset Confirm:
TrailingAction]
where
: Yes
Confirm
Include to confirm your choice.
: LocalSetup/Network/Spark/Provisioning/SerialPort/Certificates
Keep
Select which configurations to keep when you factory reset the system.
LocalSetup:
xConfiguration Audio DefaultVolume
xConfiguration Audio SoundsAndAlerts RingVolume
xConfiguration Time Zone
xConfiguration UserInterface Language
xConfiguration Video Output Connector OverscanLevel
xCommand Camera Preset Store
Network:
xConfiguration Network 1
xConfiguration NetworkServices Wifi Allowed
xConfiguration NetworkServices Wifi Enabled
Spark:
xConfiguration Spark ServiceOverrides GdsBaseUrl
xConfiguration Spark ServiceOverrides U2CBaseUrl
xConfiguration Spark ServiceOverrides WdmBaseUrl
120
API Reference Guide
xStatus Appendices
Confirm [Keep: Keep] [TrailingAction:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.