Video Commands; Xcommand Video Activespeakerpip Set; Xcommand Video Input Setmainvideosource; Xcommand Video Layout Layoutfamily Set - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Video commands

xCommand Video ActiveSpeakerPIP Set

Sets position for the active speakers PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video ActiveSpeakerPIP Set Position:
where
Position
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
UpperRight
Select one of the predefined positions.

xCommand Video Input SetMainVideoSource

Set which input source is the main video source. You can identify the input source by either
the physical connector that it is connected to (ConnectorId) or the logical source identifier
(SourceId).
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Video Input SetMainVideoSource [ConnectorId: ConnectorId] [Layout:
Layout] [SourceId: SourceId]
where
ConnectorId
: Integer (1..5)
The identifier (ID) of the connector. Connector [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Connector.
Layout
: Literal (Equal / PIP)
Not applicable.
SourceId
: Integer (1..4)
The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Source.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
Position
xCommand xCommand

xCommand Video Layout LayoutFamily Set

Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [CallId: CallId]
LayoutFamily: LayoutFamily [CustomLayoutName: "CustomLayoutName"]
where
Target
: local/remote
Select if the target is the local layout or the remote layout.
CallId
: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
LayoutFamily
: auto/custom/equal/overlay/prominent/single
Select a layout family.
CustomLayoutName
: String (1, 128)
Enter a name for the layout.

xCommand Video PresentationPIP Set

Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
Position
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
UpperRight
Select one of the predefined positions.
138
API Reference Guide
xStatus Appendices
Position
Copyright © 2017 Cisco Systems, Inc. All rights reserved.