Interface Area - Omron C200H-MC221 Operation Manual

Interface Area

7-5

Interface Area

Definition of Interface Area
58
JOG Switch
If any other manual command is not being executed and if the axes are servo-
locked, X and Y axes start jogging. The motors remains ON while the switch is
pressed.
This section provides a brief explanation of the interface area necessary for
creating a ladder-diagram program that executes the MC program.
The interface area is an area where commands from the PC, status of the MC
Unit, and task data are transferred between the PC and the MC Unit.
Starting, stopping, or continuing
program execution
Data from the MC Unit
Section 7-5
MC Unit
Internal
processing
MC Unit
data