Omron C200H-MC221 Operation Manual page 48

Peripheral Devices
MC Support Software Functions
Function
Applicable computer
Operating environment
Editing programs
Editing position data
Editing parameters
Transferring and
comparison
Printing
Monitoring
File control
System settings
34
IBM PC/AT or compatible (CPU 80286/80386/80486)
Memory: Open area of 490K bytes or larger
Hard disk: Open area of 1 megabyte or larger
Operating system: PC-DOS/MS-DOS
MC program can be created, modified, or deleted.
Position data can be created, modified, or deleted.
System parameters can be created or modified.
The contents of MC programs, system parameters, and position data are transferred and
compared between the MC Unit and the IBM PC/AT or compatible. The MC programs,
system parameters, and position data are stored as backups in the flash memory.
The contents of MC programs, system parameters, and position data can be printed.
Monitoring while the MC program is running.
Monitoring the present position
Present positions in the reference coordinate system
(either in user-set display unit such as mm or in pulses)
Present position in the workpiece coordinate system
Work origin shift
Error counter count
FAL status of the MC Unit
I/O status of the MC Unit
Displaying a list of files, loading, saving or deleting a file
Formatting floppy disks
Setting the PC model.
Setting the communications system (peripheral bus/Host Link)
Specifications
Section 4-3