Peripheral Devices - Omron C200H-MC221 Operation Manual

Peripheral Devices

Dedicated I/O Cable and
Terminals
4-3 Peripheral Devices
SYSMAC Support Software
MC Support Software
Teaching Box
32
A dedicated I/O cable and terminals are available to connect input signals, such
as CCW, CW, and origin proximity signals, to the MC Unit.
Name
MC Unit Cable
MC Unit Terminals
Shown below is a brief explanation of peripheral devices used to operate the MC
Unit.
MC Unit
Dedicated cable
Teaching Box
Note This host link is a dedicated communications link between the MC Support Soft-
ware and the C200H-MC221.
Used for creating an I/O table and a ladder-diagram program, and for monitoring
various data.
Used for creating MC Unit control programs in G language or for setting parame-
ters.
Used for jogging operations, origin searches, executing control programs pre-
viously transferred to the MC Unit, displaying present positions, and teaching.
Model
XW2Z-100J-F1
XW2B-20J6-6
SYSMAC Support Software
IBM PC/AT or compatible
Peripheral bus/Host Link
MC Support Software
Section 4-3
Remarks
Length: 1 m
---
C200H/C200HS/
C200HX/HG/HE
series PC
(See note)
IBM PC/AT or compatible