Picture In Picture - Dual - ATEN CM1284 User Manual

Picture in Picture - Dual

A dual PiP view shows 2 computers on the monitor with one as the main
display, and the other overlapping the main display in an inset window.
Method
Front Panel Press Select to cycle through display
modes.
IR Remote Press the PiP2 button.
Control
Quick Access Move the mouse to the top center of
Toolbar the OSD to display the Quick Access
Toolbar, and then select from the Quick
Access Toolbar.
Note: Hardware Cursor Mode must be
enabled, see The OSD Menu, page 57.
Hotkey Enter the illustrated hotkeys. See The
Hotkey Setting Mode, page 48 for
hotkey instructions.
OSD Menu
In the OSD, click
Access Toolbar, go to Display >
Multiview Mode, and then select PiP2.
Note: You may need a password to
access the OSD Menu. For details, see
Password Protection, page 58.
Action
from the Quick
Chapter 3. Basic Operation
Description
37