Epim-C (Bnc Port - Cabletron Systems ETWMIM User Manual

A.2.4 EPIM-C (BNC Port)
Internal
Transceiver:
Type:
Termination:
Grounding:
Warning: Connecting a thin-net segment to earth ground at more than
one point could produce dangerous ground currents.
Cabletron Systems TMS-3™ Transceiver
BNC receptacle, with gold center contact, for
use with BNC type tee-connectors and RG-58
thin-net cable.
Internal Termination Switch
= On (internally terminated)
= Off (need external termination)
Figure A-4. EPIM-C (with BNC Port)
Using the switch to the side of the port, you can
internally terminate the port on the module via a
built-in 50 ohm terminator. This eliminates the
need to connect the port to a tee-connector and
terminator.
For safety, connect only one end of a thin-net
segment to earth ground. Do not connect the
BNC port of an EPIM-C to earth ground.
EPIM SPECIFICATIONS
Page A-11