Setting The Trap Table; Etwmim Trap Table Screen - Cabletron Systems ETWMIM User Manual

7. Using the arrow keys, highlight the SAVE IP option and press the
Return key, (or press F6). The message "SAVED OK" appears and
Local Management saves the changes to memory.
Note: The first time you try to exit the screen without saving your
changes, Local Management displays a "NOT SAVED?" message. If
you proceed to exit without saving, you lose all edits.

5.5 SETTING THE TRAP TABLE

As an SNMP compliant device, the ETWMIM can authenticate an
SNMP request. The Trap Table defines the management stations that
will receive SNMP Traps for alarm/event notification.

5.5.1 ETWMIM Trap Table Screen

To access the Trap Table screen from the Features Selection screen:
1. Use the arrow keys to highlight the Component Trap Table
option and press the Return key, or press F8. The Trap Table
screen, Figure 5-5, appears.
SNMP Community Name
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
SAVE
F6
ETWMIM LOCAL MANAGEMENT
Cabletron ETWMIM Revision 00.00.00
TRAP TABLE
COMMUNITY NAMES
F7
Figure 5-5. Trap Table Screen
LOCAL MANAGEMENT
Traps Trap IP Address
N 0.0.0.0
N 0.0.0.0
N 0.0.0.0
N 0.0.0.0
N 0.0.0.0
N 0.0.0.0
N 0.0.0.0
N 0.0.0.0
IP TABLE SNMP TOOLS CLI
F8 F9
RETURN
F10
Page 5-9