Configuring Wan Physical Attributes; Accessing The Wan Configuration Screen; Wan Physical Configuration Screen Fields - Cabletron Systems ETWMIM User Manual

LOCAL MANAGEMENT

5.7 CONFIGURING WAN PHYSICAL ATTRIBUTES

The WAN Physical Configuration screen allows you to define the
physical attributes of your WAN interface.
5.7.1 Accessing the WAN Configuration Screen
To access the WAN Physical Configuration screen from the Features
Selection screen use the arrow keys to highlight the WAN
CONFIGURATION option and press the Return key. The WAN
Physical Configuration screen, Figure 5-7, appears.
Note: T1 information fields appear on the WAN Physical Configuration
screen only after you install the optional T1-SRM module.
Active WAN Port:
Default WAN Port: T1
SYNC Port Type:
Force CTS True:
Force DSR True:
SAVE
F6
Figure 5-7. WAN Physical Configuration Screen
5.7.2 WAN Physical Configuration Screen Fields
Active WAN Port
Displays the active WAN port. In future ETWMIM releases, this field
will provide port redundancy information.
Page 5-18
ETWMIM LOCAL MANAGEMENT
Cabletron ETWMIM Revision 00.00.00
WAN PHYSICAL CONFIGURATION
T1 T1 Timeslot View:
T1 Line Coding:
T1 Frame Type:
V.35 T1 Xmit Clk Src:
Yes
No
01-08 00 00
09-16 00 00
17-24 00 00
WAN INT CONFIG
Active
B8ZS
ESF
LOCAL TIMING
T1 Timeslot Configuration
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
RETURN
00
00
00