Table of Contents
Advertisement
3.7 CONNECTING TO LOCAL MANAGEMENT
Access Local Management by attaching a management console to the
RJ-45 COM 2 port of the ETWMIM (see Figure 3-5). The console
connection supports a Digital Equipment Corporation VT200 or 300
series terminal or PC emulation of one of these terminals.
Connect the console to the ETWMIM as follows:
1. Attach the male RJ-45 connector to the ETWMIM COM 2 port.
2. Attach the female end (25-pin or 9-pin, as applicable) to the COMM
port on the terminal.
3.8 FINISHING THE INSTALLATION
The ETWMIM is now ready for operation. Before placing the network
into service, test the installation thoroughly, making sure that all
stations are able to be addressed and that the ETWMIM and all
stations are indicating normal operation.
TOKEN RING
WAN
Figure 3-5. COM Connections
INSTALLING THE ETWMIM
C
O
M
1
C
O
M
2
ETHERNET
Page 3-9
Advertisement
Table of Contents
